 Owner's Manual & Installation Instructions |
 |
      |
|
|
|
|
|
|
| Click to download PDF version | |
|
|
|
|
The Runtal Sundance is designed for 120V AC 60Hz and must be GFCI protected. This protection is integrated into the cord provided.
Contents:
|
  |
|
|
|
InstallationThe Runtal Sundance must be used only when wall mounted in an upright position with the control switch in the lower right hand corner. |
|
|
|
|
|
Step 1 Attach the Four Posts to the Radiator Position the four posts. The placement of the mounting posts is flexible, however it is recommended where possible that the posts be placed near the corners of the unit between the second and third tubes from the top and bottom. All four posts supplied with the towel radiator should be used, half as top supports and half as bottom supports.
|
 |
|
|
|
|
Step 2 Position the Radiator on the Wall To hang the unit either (1) Ask an assistant to hold the unit against the wall while you trace the four mounting posts. (2) Measure out the post positions. (3) Make a template by placing the towel radiator onto a posterboard or a large piece of the carton and tracing the mounting posts. The template is then taped to the wall.
|
 |
|
|
|
|
Step 3 Determine Wall Construction For solid wood or placement into blocking use the provided #8 x 11/2" long screws, (part A). For drywall construction use the included metal anchors, (part B). Runtal Sundance towel radiators are very sturdy and care should be taken that they are securely hung using all four mounting posts.
|
|
|
|
|
|
Step 4 Drill Holes Drill holes for appropriate anchors in the middle of all four traced circles. Use of the metal wall anchors will require a 5/16" hole; use of the 11/2" screw will require a 1/16" pilot hole.
|
|
|
|
|
|
Step 5 Fasten the Bracket sleeves to the Wall Using the proper fasteners (either the metal anchors or #8 screws) attach the bracket sleeves to the wall. Fasten the sleeves with the set screw on the top for sleeves at the top of the radiator and set screw on bottom for sleeves at bottom of radiator.
|
 |
|
|
|
|
Step 6 Hang the Towel Radiator on the Wall Insert all four radiator posts into the four wall sleeves and tighten each set screw.
|
 |
|
|
|
|
Step 7 Make the Electrical Connections Simply plug the radiator in.
|
|
|
|
|
|
Maintenance The Runtal Sundance towel radiator has been designed to require the absolute minimum maintenance and care under normal use. However, care should be taken when cleaning the surface of the towel radiator. As with any electrical appliance, the electric towel radiator should only be cleaned when in the OFF position (unplugged if possible). The towel radiator's painted finish provides an elegant yet durable finish to this welded steel product. Occasional cleaning of this finish is best done with a water dampened cloth. Under no circumstances should abrasive cleaners, clothes or pads be used.
|
|